IMDseries

IMD series

Professional amplifiers

Combining the excellent sound of Class AB and the power efficiency of the Class D amplifiers, TD Class technology allows lightweight amplifiers to deliver powerful and high-quality signal at the same time. In this amplifiers the power supply tracks the audio signal at all frequencies, supplying the required rail voltage while at the same time reserving additional headroom. The superior efficiency reached by TD Class allows greater power density while minimizing cooling requirements, yet sound quality matches the best class AB design.
The latest protection system carries out an advanced analysis of signal level. When transducers operate in the nonlinear domain, either at high excursion, high temperature or high voltage, protection system acts as a smart power regulator to extend the component durability, while maintaining the highest dynamic range.
Inputs are available in analogue and AES , AKM 96 kHz A/D converters at the front-end yield an impressive encoding dynamic of 120 dB. AES/EBU digital inputs operate with sample rate converters from 44.1 kHz to 192 kHz.

OUT POWER AT 1KHz , <0.05 THD
8Ω Power 4 x 1000 W
4Ω Power 4 x 2200 W
2Ω Power 4 x 2400 W
Bridge at 8 Ohms 2 x 4400 W
Bridge at 4 Ohms 2 x 4800 W
AMPLIFICATION
Harmonic distorsion 20Hz a 20KHz a 1W <0.1%
Total Harmonic dostrsion at 1KHz 1dB: <0.05%
Signal to noisse ratio >120dB
Frecuency response (+/- 0,1dB) 10Hz – 34Hz 10Hz – 34 KHz
Damping factor >500
Input impedance:20kOhm balances / 10KOhm unbalanced 20 /10 Kohm
CONNECTORS
Output 4 x SpeakOn connectors Neutrik
Input 2 x Female XLR connector Neutrik
Link 2 x Male XLR connectors Neutrik
OTHER
Protections Short circuit, open circuit, thermal, overloaded DC, super audio protection
Input voltage range: 200-240V ~50Hz
Dimensions (L x D x H) 445 x 465 x 95 mm
Weight 20,5kg
OUTPUT POWER
8Ω Power 4 x 1800W
4Ω Power 4 x 3500W
2Ω Power 4 x 4000W
AMPLIFICATION
Frequency response/ 20 Hz – 20 kHz ± 0.1 dB (at 8 Ω, 60 W output power)
± 0.1 dB (at 4 Ω, 120 W output power)
Distortion/ THD+N (20 Hz – 10 kHz) < 0.05% (at 8 Ω, 60 W output power)
< 0.1% (at 4 Ω, 120 W output power)
Output dynamic range > 112 dB (20 Hz – 20 kHz, 8 Ω, A-weighted)
Amplification gain 32 dB
Noise level < - 72 dBV (20 Hz - 20 kHz, 8 Ω, A-weighted)
Channel separation > 85 dB (at 1 kHz , 3 x 120 W, 4 Ω)
Damping factor > 400 (1 kHz and below, 8 Ω)
POWER SUPPLY
Model universal Switched Mode Power Supply (SMPS) with power factor correction (PFC)
Power factor > 0.9 (except Standby on all voltages, and Idle on 220 V)
Mains rating 100 V – 240 V ~ ±10%, 50-60 Hz
Switch On rating 70 V – 270 V 50-60 Hz
Nominal current requirements 32 A for 200-240 V
PROTECTION
Mains and power supply Over and under voltage, Over temperature, Over current (fuse protection)
Power outputs Over current, DC, Short circuit, Rail over and under voltage over temperature
Cooling system Fans with temperature-controlled speed